Toshiba M400 - Portege - Core 2 Duo 1.83 GHz Maintenance Manual Download Page 137

Page: 137 / 426

3.5 Heatrun Test

3 Tests and Diagnostics

PORTEGE M400 Maintenance Manual (960-541)

[CONFIDENTIAL]

3-19

3.5 Heatrun

Test

To execute this program, select

3-Repair heatrun

in the startup menu, press

Enter

After selecting the test, the same subtests as 3.24 RUNNING TEST are executed
successively.

For more details on the procedure and test content, refer to RUNNING TEST.

When the heatrun test ends, following message appears in the display.

************************************************
HEATRUN TEST END

************************************************
Press any key to continue...

Press any key and return to the startup menu.

NOTE: The test result (Errorlog.txt) is stored in the floppy disk. The result is displayed in

the same way as 3.22 LOG UTILITIES. For more detail in the display, refer to
LOG UTILITIES.

Summary of Contents for M400 - Portege - Core 2 Duo 1.83 GHz











































































































































































































































































































































































































































Search results

Summary of Contents for M400 - Portege - Core 2 Duo 1.83 GHz

Reviews:

Related manuals for M400 - Portege - Core 2 Duo 1.83 GHz

Brands by name

Popular brands

Toshiba M400 - Portege - Core 2 Duo 1.83 GHz, Maintenance Manual

Search results

Summary of Contents for M400 - Portege - Core 2 Duo 1.83 GHz

Reviews:

Related manuals for M400 - Portege - Core 2 Duo 1.83 GHz

Brands by name

Popular brands