manualshive.com logo in svg

Toshiba M400 - Portege - Core 2 Duo 1.83 GHz, Maintenance Manual

Share
Download
Toshiba M400 - Portege - Core 2 Duo 1.83 GHz Maintenance Manual Download Page 140

3  Tests and Diagnostics  

3.7  System Test 

3-22 

[CONFIDENTIAL] 

PORTEGE M400  Maintenance Manual (960-541) 

3.7 System 

Test 

To execute the System Test select 

1

 from the DIAGNOSTIC TEST MENU, press 

Enter

 

and 

follow the directions on the screen. Move the highlight bar to the subtest you want to execute 
and press 

Enter

. 

Subtest 01 

ROM checksum 

This subtest executes a checksum test of the BIOS ROM (range: F0000h to 
FFFFFh, 64KB) on the System board. 

Subtest 02 

Fan ON/OFF 

This subtest turns on/off the fan motor by force with Fan ON/OFF commands. 

The following message will appear. 

Fan number select (1;FAN#1(CPU), 2;FAN#2(GPU), 0; FAN#1&#2)? 

To check the CPU fan, press 

1

 and 

Enter

. 

To check the GPU fan, press 

2

 and 

Enter

. 

To check both CPU fan and GPU fan, press 

0

 and 

Enter

.

 

The following message will appear.  

*** Test Fan Revolution 0000RPM start 

Make sure the fan does not rotate, then press 

Enter

.

 

The following message will appear.  

*** Test Fan Revolution Low speed Start 

Make sure the fan rotates at low speed, then press 

Enter

.

 

The following message will appear.  

*** Test Fan Revolution High speed Start 

Make sure the fan rotates at high speed, then press 

Enter

. 

After a while, the fan rotating will stop.

 

Subtest 03 

Geyserville 

If the CPU supports Gerserville (SpeedStep), this Subtest checks that the CPU 
operating clock speed can be changed.

 

Subtest 04 

Quick charge 

Summary of Contents for M400 - Portege - Core 2 Duo 1.83 GHz











































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands