manualshive.com logo in svg

Toshiba M400 - Portege - Core 2 Duo 1.83 GHz, Maintenance Manual

Share
Download
Toshiba M400 - Portege - Core 2 Duo 1.83 GHz Maintenance Manual Download Page 228

3 Tests and Diagnostics 

3.31  SETUP 

3-110 

[CONFIDENTIAL] 

PORTEGE M400  Maintenance Manual (960-541) 

When 

Y

, 

E

, 

S 

and

 Enter

 keys are pressed, the data is disposed. 

After changing, the display of 

TPM 

item is changed to 

Disabled 

and this item 

becomes not displayed and the cursor could not be moved on the 

TPM

 item. 

12.

 

Display 

This group of options configures the computer’s display. 

(a)

 

Power On Display 

This option is used to select the display when booting up. 

Auto-Selected

  

 

Selects an external monitor if one is connected. 
Otherwise it selects the internal LCD. (Default) 

LCD +Analog RGB

  Selects both the internal LCD and the external CRT for 

simultaneous display. 

System LCD only 

  Selects only internal LCD display even if the external 

monitor is connected. 

NOTE:  1. When starting the computer in Standby or Hibernation, the last configuration 

is saved. If data does not appear on the display you are using after starting in 
Standby or Hibernation, press 

Fn+F5 

to change the active display device. 

   

 

 2. When an external CRT display, which does not support SVGA mode is 

connected and “LCD+AnalogRGB”

 

is selected, the external display is not 

displayed.  

(b)

 

LCD Display Stretch 

NOTE: This is not displayed in PCs with a SXGA+ LCD.  

LCD Display Stretch enables or disables a larger display area of the screen. 

Enabled

   

 

Enables the LCD display stretch feature. (Default) 

Disabled

   

 

Disables the LCD display stretch feature.  

Summary of Contents for M400 - Portege - Core 2 Duo 1.83 GHz











































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands