manualshive.com logo in svg

Toshiba M400 - Portege - Core 2 Duo 1.83 GHz, Maintenance Manual

Share
Download
Toshiba M400 - Portege - Core 2 Duo 1.83 GHz Maintenance Manual Download Page 136

3  Tests and Diagnostics  

3.4  Setting of the hardware configuration 

3-18 

[CONFIDENTIAL] 

PORTEGE M400  Maintenance Manual (960-541) 

Subtest 08  

System configuration display 

 

 

 

 

This subtest displays the information of the system configuration. 

 

 

 

 

Confirm the contents and press 

Enter

.  

For more details on the system configuration information, refer to 3.26 
“System configuration”. 

Subtest 09  

E2PROM test (MAC/GUID/DMI) 

 It checks whether the MAC address, GUID of IEEE1394 and DMI 
information are written. 

Summary of Contents for M400 - Portege - Core 2 Duo 1.83 GHz











































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands