3 Tests and Diagnostics
3.24 SETUP
Libretto 50CT/70CT Maintenance Manual
3-61
(e)
System Beep
Use this feature to enable or disable the system beep.
Enabled
Enables the feature. Default
Disabled
Disables the feature.
(f)
Panel Power On/Off
This option allows you to automatically turn your computer on or off by
opening or closing the display panel. If this feature is enabled when the
computer is in Resume mode, the system is automatically powered off when
the display panel is closed and powered on when the panel is opened. This
option does not appear when the computer is in boot mode.
Enabled
Enables the feature. Default
Disabled
Disables the feature.
NOTE:
Do not remove the AC adapter and battery pack at the same time when
you use this feature. If you do, data saved by AutoResume will be lost. You must
also reset this option.
(g)
Alarm Power On
This option lets you set a time and date for automatic power on and lets you
enable or disable the ring indicator feature.
Ring Indicator
is displayed only
when the computer is in Resume mode and
Alarm Date Option
is displayed
when
Alarm Time
is enabled.
OPTIONS
Alarm Time
= xx:xx:00
Alarm Date Option
Ring Indicator
= xx - xx
= Enabled
Alarm Time
is set in the sequence of hours and minutes. Seconds cannot be
changed. Alarm Date Option is set in the sequence of month and day. If Alarm
Date is set to Disabled, the computer will be powered on at the same time every
day. Press
↓
to move the cursor to the right and
↑
to move the cursor to the left
when you set the date and time.
Summary of Contents for Libretto 50CT
