Toshiba Libretto 50CT, User Manual

Page: 122 / 196

3 Tests and Diagnostics 3.24 SETUP
Libretto 50CT/70CT Maintenance Manual 3-57
(c) Parallel Port
This option sets the interrupt level and I/O address for the parallel port. When
the Printer Port Type (see settings below) is set to Std. Bi-directional, the
options are:
LPT setting Interrupt
level
I/O address
LPT 1 7 378H
LPT 2 5 278H
LPT 3 7 3BCH
Not Used (Default)
Others (Other settings are made
automatically by the Plug-
and-Play operating system.)
When the Printer Port Type (see settings below) is set to ECP, the DMA
channel can also be set to 1, 2, or 3. The default is 3.
LPT setting Interrupt
level
I/O address DMA Channel
LPT 1 7 378H 3
LPT 2 5 278H 3
LPT 3 7 3BCH 3
Not Used (Default)
Others (Other settings are made
automatically by the Plug-and-
Play operating system.)
When you select one of the above options, except for Not used , a subwindow
similar to the one below displays to let you set the parallel port mode. The
options for this setting are
ECP (default) and Std. Bi-Directional .
OPTIONS
Mode
DMA =
= ECP
Channel 3
For most printers, the port should be set to ECP . With other parallel devices,
the setting should be Std. Bi-Directional .