Toshiba Libretto 50CT, User Manual

Page: 112 / 196

3 Tests and Diagnostics 3.22 Floppy Disk Drive Utilities
Libretto 50CT/70CT Maintenance Manual 3-47
(c) Remove the diagnostics disk from the FDD, insert the source disk, and press
any key. The following message displays, indicating the program has started.
[ FDD TYPE ] : TRACK = XXX
[ FDD TYPE ] : HEAD = X
[ FDD TYPE ] : SECTOR = XX
Copy start
[[ track,head = XXX X ]]
(d) Remove the source disk from the FDD, insert a formatted work disk, and press
any key. The [[ track, head = XXX X ]] message displays and starts copying
to the target disk. When the amount of data is too large to be copied in one
operation, the message from (b) displays again. After the floppy disk has been
copied, the following message will display:
Copy complete
Another copy (1:Yes/2:No) ?
(e) To copy another disk, type 1 and the message from (a) will display again.
Enter 2 to return the test program to the Diagnostic Menu.
5. DUMP program
(a) When dump is selected, the following message displays:
DIAGNOSTICS-HARD DISK & FLOPPY DISK DUMP : VX.XX
Drive type select (1:FDD, 2:HDD) ?
(b) Select a format type number. If 1 is selected in step (a), the following message
displays:
Select drive number (1:A, 2:B) ?
Select an FDD drive number. The display will go to step (c).
If 2 is selected, the following message displays:
Select drive number (1:C, 2:D) ?
After selecting the HDD, the display will go to step (f).
(c) The following message displays:
Format type select (1:2DD, 2:2D, 3:2HD)