Toshiba Libretto 50CT, User Manual

Page: 117 / 196

3.24 SETUP 3 Tests and Diagnostics
3-52 Libretto 50CT/70CT Maintenance Manual
3.24.3 Moving Within the SETUP Menu and Changing Values
1. Press
← ←
and
→ →
to move between the two columns. Press
↑↑
and
↓ ↓
to move between
items in a column.
2. Press either the space bar or BkSp to change the value.
NOTES: 1. On either page, you can go directly to a specific group by pressing
the first letter (highlighted) of the group’s name. For example, B,
to go to the Battery group.
2. To change pages, press the PgUp (page up) or PgDn (page down)
key.
3.24.4 Accepting Changes and Exiting the SETUP Window
1. Press End to accept the changes you made.
If the changed item does not require the system to reboot, the following message
displays:
Are you sure? (Y/N)
If the changed item requires the system to reboot, the following message displays:
Are you sure? (Y/N)
The changes you made will cause the system to reboot.
2. To make other changes, press N . Repeat the steps above.
3. To accept the changes, press Y .
NOTE: You can press Esc to quit at any time without saving changes. SETUP
asks you to confirm that you don’t want to save your changes.
3.24.5 The Factory Preset Configuration
When you access SETUP, the current configuration displays.
1. To show the factory preset configuration, press Home .
2. To accept the default settings, press End and then press Y .