Basic Installation and Operation Guide
JK 400 Series Fixed Controllers
TOSHIBA
Equipment Warning Labels
DO NOT
attempt to install, operate, perform maintenance, or dispose of this equipment, until you have read and
understood all of the product labels and user directions that are contained in this manual.
Warning labels that are attached to the equipment will include the exclamation mark within a triangle.
DO NOT
remove or cover any of these labels. If the labels are damaged or if additional labels are required, contact
the Toshiba Customer Support Center.
Labels attached to the equipment are there to provide useful information or to indicate an imminently hazardous
situation that may result in serious injury, severe property and equipment damage, or loss of life if safe procedures
or methods are not followed as outlined in this manual.
Qualified Personnel
Installation, operation, and maintenance shall be performed by
Qualified Personnel ONLY
. A Qualified Person
is one that has the skills and knowledge relating to the construction, installation, operation, and maintenance of
the electrical equipment and has received safety training on the hazards involved (Refer to the latest edition of
NFPA 70E for additional safety requirements).
Qualified Personnel
shall:
• Have carefully read the entire manual.
• Be
come familiar with the construction and function of the starter, the equipment being driven, and the hazards
involved.
• Be able to recognize and properly address hazards associated with the application of motor
-driven equipment.
• Be trained and authorized to safely energize, de
-energize, ground, lock-out/tag-out circuits and equipment, and
clear faults in accordance with established safety practices.
• Be trained in the proper care and use of protective equipment such as safety shoes, rubber gloves, hard hats,
safety glasses, face shields, flash clothing, etc., in accordance with established safety practices.
For further information on workplace safety, visit www.osha.gov.
