Toshiba IPedge, Installation Manual

Page: 127 / 196

MP118 MEDIA SETTINGS Endpoint Numbers
Installation Manual June, 2011 12-7
Enter the Destination Number for Port 5 FXO. Refer to the URI table
in the IP
edge database.
24. Click on Submit .
Endpoint Numbers 25. Select Protocol Configuration > Endpoint Number > Endpoint
Phone Number .
In the Channel number column enter (the same as the FXO Port
number)
Phone number = The number assigned in the IP edge URI table
(4001 for example)
Hunt Group ID = 1
Tel Profile ID = 0
Hunt Group Settings 26. Select Protocol Configuration > Hunt IP Groups > Hunt Group
Settings
Hunt Group ID
= 1
Channel select mode = Ascending
27. Select Protocol Configuration > Advanced Applications > FXO
Settings
Dial Mode
= One Stage
Leave the other parameters at default values
28. Click on Submit .
29. Click on the the Burn Icon at the top of the screen. Then use the
"device action" drop down box and select reset . In the next screen
click on Reset .
A value from the URI table
4001 for example
Note: Start the Destination Phone Number entries with the
first FXO port.
4001