139
11. Night time Low-noise Setting
• This function is available only for the header remote controller.
• This setting is used to reduce noise output, from the outdoor unit, during night time for neighbours. Night time
low-noise operates with lower operation frequency and fan tap than normal operation only for the set time period.
<How to enable, set start time and end time of night time low-noise>
• This function is available only for the header remote controller.
1
Press the [
] / [
] button to select “Silent mode” on the
MENU screen, then press the [ ] button.
2
Press the [
] button to select “ON” on the Silent mode screen,
then press the [
] button.
3
Start the heating, cooling or hot water operation. The mark appears on the top screen during
the set-up time zone.
1
Press the [
] / [
] button to select “Silent mode” on the
MENU screen.
2
Press the [ ] button for 4 seconds or longer to enter the setting mode. The function code setting
screen appears.
FC No. 0A: Start time (Range: 0~23, Default: 22)
0B: End time (Range: 0~23, Default: 06)
3
Press the [
] / [
] button to select FC number or Data, then press the [
] / [
] button to
set the value.
The same value cannot be set to 0A and 0B.
4
Press the [
] button. The set time is registered.
Auto mode
MENU(1/2)
Schedule timer
Night setback
Silent mode
Hot water boost
SET
ON
Silent mode
OFF
FIX
Auto mode
MENU(1/2)
Schedule timer
Night setback
Silent mode
Hot water boost
SET
Silent mode
FC No.
Data
FIX
Summary of Contents for HWS-P1105HR-E
Page 183: ...182 ...
Page 184: ...Copyright 2017 TOSHIBA CARRIER CORPORATION ALL Rights Reserved ...
