126
• Auto-Curve temperature shift
Without Auto-Curve individually set, the set temperature can be
shifted in the range of ±5k of the current setting. (The set temperature
is valid only when Auto operation is in progress. It also applies to
Zone 2.)
1
Press the AUTO TEMP
button for 4 seconds or
longer. (See display
)
(The remote controller FC setting screen appears.)
2
Set a temperature shift range with the TEMP.
button for temperature setting. (-5k to 5k)
3
Press the SET
button. (If
lights, the status is
confirmed)
4
Pressing the TEST
button moves the unit to the normal
stop state.
5. Time Setting
1
Press the TIME
button for 4 seconds or longer. (The
screen moves to the time setting mode.) (See display
)
Day, time,
, and
indications blink.
(Time setting is available during an operation.)
2
Specify a day to be set.
Press the DAY
button to select the current day.
The
symbol moves along above the days. (
moves by each
button press from MO through SU.)
3
Set time.
Use the TIME
button to set time. Long press changes time
display by 10 minutes.
4
Pressing the SET
button ends the time setting. Ending
the time setting changes the days and time to the lit state
and returns to the normal display.
and
indications go out.)
2
4
3
1
3
1
4
2
AMP Air Conditioning
www.ampair.co.uk | [email protected]
