Toshiba G1IF4, Instruction Manual, Page: 31 / 129


30

6 F 2 S 0 8 7 7
4.4 Status
In the on-line operation, the status of G1IF4 can be displayed.
- Following status is displayed:
- Metering data of each IED
- Binary input
- Binary output
- LED / Communication
- Time synchronization source
- Count
Click the [Status] button on the [Top menu] screen. The status data are extracted from the G1IF4
and the following status screen appears. Then, click the tab to display.
In the [LED/Comm] tab, the status of LED is displayed by “G”, “R” or “Y” (Green, Red or
Yellow). The reversed display shows the lighting status. If clicking the [Latch Reset] button, the
latched LEDs are reset. The lamp test of LEDs is performed by clicking the [Lamp Test] button.
The status of communication is displayed by “NG” or “OK”.
For other tabs, refer to the RSM100 instruction manual.
Reversed
display