Toshiba G1IF4 Instruction Manual Download Page 22

Page: 22 / 129



6 F 2 S 0 8 7 7

4.2.3.5 IEC60870-5-103 and IEC61850 setting

The following items related IEC60870-5-103 are set:

IEC60870-5-103 retry: set the retry times within the range of 0 to 5.

IEC60870-5-103 polling: set the polling time within the range of 0 to 200ms.

IEC60870-5-103 loop: set the loop delay time within the range of 0 to 200ms.

IEC60870-5-103 timeout: set the receive timeout time within the range of 50 to 30000ms.

IEC60870-5-103 sigrst: set the reset time for only On signal within the range of 0.1 to 10.0s.

IEC61850 block: select “Blocked” to block the monitor direction.

IEC61850 auth: select “On” to use the authentication function.

IEC61850 deadtm: set the dead time within the range of 10 to 120min.

IEC61850 deadband: set the measurement dead band within the range of 0.1 to 10.0%.

GOODE interval: set the max. GOOSE sending period within the range of 1 to 10s.

Ping check: select “On” to execute Ping response check.

GOOSE check: select “On” to execute GOOSE receive check.

SC check: select “On” to execute Server connect check.

TSCCOMF: set the Server connect checkout time within the range of 0 to 60s.

Summary of Contents for G1IF4

































































































































Search results

Summary of Contents for G1IF4

Reviews:

Toshiba G1IF4, Instruction Manual, Page: 22 / 129

Search results

Summary of Contents for G1IF4

Reviews: