manualshive.com logo in svg

Toshiba EN655, Instruction Manual

Share
Download
Toshiba EN655 Instruction Manual Download Page 8



 6F8C1566 

vi 

 

 Restrictions on Application 

■

  This product is not developed/manufactured for use in systems involving devices that directly affect 

human life (Note 1).    Do not use them for such applications. 

■

 To use this product for systems that involve devices that significantly affect human safety or 

maintenance of public functions (Note 2), special considerations (Note 3) are required in system 

operation, maintenance, and management.  In this case, contact one of Toshiba's sales 

representatives. 

(Note 1)  Devices that directly affect human life include the following. 

  Medical devices such as life supporting devices and devices for surgical units. 

(Note 2)  Systems that involve devices that significantly affect human safety or maintenance of public 

functions include the following. 

  Main unit control systems of nuclear power plants, safety protection systems of nuclear 

facilities, and other systems that are critical for safety 

  Operation control systems of mass transportation systems and air traffic control systems 

(Note 3)  Special considerations indicate sufficient discussions with Toshiba's engineers to construct a 

safe system (e.g. employing fool-proof design, fail-safe design, or redundant design). 

 

 

 Disclaimer 

■

 

Toshiba shall not be responsible for any damage caused by fire or earthquake, acts of a third party, 
other accidents, the user's willful acts or negligence, misuse, or use in abnormal conditions. 

■

 

Toshiba shall not be responsible for any incidental damage (loss of business profits, interruption of 
business, change or loss of stored memory) caused by use of or being unable to use this product. 

■

 

Toshiba shall not be responsible for any damage caused by failure to observe the information 
described in the operation manual. 

■

 

Toshiba shall not be responsible for any damage caused by malfunctions due to combination with any 
connected device. 

■

  Toshiba shall not be responsible for any damage caused by malfunctions due to combination with any 

application program created by the customer. 

 

Note 

Use your cellular phone or PHS 1 meter or more away from the product main unit in operation, 

various transmission cables, and I/O bus cable. Otherwise, the system may malfunction. 

Summary of Contents for EN655









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands