Toshiba E-tudio190F, Operator'S Manual

Page: 149 / 208

Document Fax
149
Installation and Setup (For the Network Connected Models)
Docum
e
nt Managem
e
nt
Syste
m
S
ecti
o
n
5
The PC Fax Properties appears.
< General > Tab
Input the PC Fax Settings.
Send Only System:
• Device's Email Address
It is not necessary to enter any Email Address.
• Device’s Relay XMT Password
The Relay XMT Password of the device.
• Result Report Email Address
This Setting is unnecessary. (See Note 1 and 3)
Send & Receive System:
• Device's Email Address
Set the Email Address of the device. (See Note 2)
• Device's Relay XMT Password
The Relay XMT Password of the device.
• Result Report Email Address
Set the POP Email Address for the reception. (See Note 3)
Note: 1.
If you have your own Email Address and your device is
set up to Internet Fax, set your Email Address here.
You can receive the Result Report from the device. In
that case, set the Relay XMT Report = Always (Fax
Parameter No. 143).
2. The email address is used to distinguish the device.
Input it precisely, otherwise the Device Name and
Device Location on the Receive Log may not be
indicated properly.
3.
When the Relay Domain is set in the User Parameters
of the device, it is required to be the within the same
domain (The right part of @) of the Email address for
the Result Report Email Address. If it doesn't
correspond, transmission from the Document Fax is
rejected.
< Transmission/Reception > Tab
• Transmission Setting
- Transmission Priority
If there are multiple devices available, you can set the
transmit priority of the device.
- Dept. counter mode On
When the Department Code function is being used at the
device, check the box and input the Identification Code
- Start Status Monitor at sending
Starts Status Monitor is automatically activated at sending.
The condition of the device can be monitored.
The Device Group 2 doesn't have this function.
• Reception Setting (Send & Receive System only)
- Makes Reception Effective
Check this box if you want to enable reception with this
device.
• Acquires Phone Book data from the device
- Device's Password
Device's Password to acquire the phone book data from
the device, it is required to set the same password as the
Password of the device.
Note:
Enter the Key Operator Password.
Click the button when you finish inputting the
settings.
OK
Continued on the next page...