Toshiba e-STUDIO232, Quick Start Manual

Page: 40 / 92

5 SETUP FLOW
38 ABOUT SETUP
ABOUT SETUP
Initial Device Setup
First of all, you must set up how this equipment is managed and works as copier, printer, scan-
ner, and facsimile. This equipment can be used with the default settings, but some must be con-
figured for this equipment works properly.
P.39 “INITIAL DEVICE SETUP”
Setup the Network Document Processing System
This equipment is the Network-Ready MFP that can be used immediately after you connect to
your network.
However, it is recommended to read following sections to make sure you choose right environ-
ments and efficient settings for each features on this equipment even if you connect the machine
to the above environments. Also some features require configuring the settings to suit your envi-
ronments.
This equipment may provide advanced document processing system in your place, if you add lit-
tle more environments in your place.
The references below are described easy-setup flow to enable each advanced document pro-
cessing features:
Setup Flow for Printing Environments
P.44 “Setup Flow for Microsoft Windows Workstation”
P.56 “Setup Flow for Macintosh Workstation”
P.62 “Setup Flow for UNIX Workstation”
P.65 “Setup Flow for FTP Printing”
P.67 “Setup Flow for E-mail Printing”
Setup Flow for Scanning Environments
P.69 “Setup Flow for Scan to File”
P.71 “Setup Flow for Scan to E-mail”
Setup Flow for Fax/Internet Fax Environments
P.75 “Setup Flow for Network-Fax”
P.77 “Setup Flow for Internet Fax”
P.80 “Setup Flow for Onramp Gateway” (Optional Fax unit required)
P.82 “Setup Flow for Offramp Gateway” (Optional Fax unit required)
Setup Flow for e-Filing Environments
P.85 “Setup Flow for e-Filing Web Utility”
P.86 “Setup Flow for e-Filing Client Software”
Setup Flow for TopAccess, Web-based Network Management Utility
P.40 “SETUP FLOW FOR TopAccess”