Toshiba E-studio2040c Page 93 Management Manual Download

Page: 93 / 282

2.SETTING ITEMS (ADMIN)

Setting General Functions 91

2 SETTING ITEMS (ADMIN)

Setting the Auto Power Save mode

Press [AUTO POWER SAVE].

The AUTO POWER SAVE screen is displayed.

Press the desired period of time (in minutes) that this equipment should wait before the
Auto Power Save mode is activated.

The Auto Power Save mode setting is completed, and you will be returned to the previous screen.

Setting the Sleep or Super Sleep mode

Press [SLEEP/SUPER SLEEP].

The SLEEP/SUPER SLEEP screen is displayed.

Summary of Contents for E-studio2040c


























































































































































































































































































Search results

Summary of Contents for E-studio2040c

Reviews:

Related manuals for E-studio2040c

Brands by name

Popular brands

Toshiba E-studio2040c, Management Manual

Search results

Summary of Contents for E-studio2040c

Reviews:

Related manuals for E-studio2040c

Brands by name

Popular brands