Toshiba E-studio2040c Page 197 Management Manual Download

Page: 197 / 282

2 SETTING ITEMS (ADMIN)

Printing Lists 195

Printing Lists

This menu allows you to print NIC CONFIGURATION PAGE, FUNCTION LIST, PS3 FONT LIST, and PCL FONT LIST.

For examples of each list format, see the following page:

P.246 “List Print Format”

Press [LIST/REPORT] in the ADMIN menu (1/2).

The LIST/REPORT screen is displayed.

To display the ADMIN menu, see the following page:

P.75 “Entering Admin Menu”

Press [LIST].

The LIST screen is displayed.

Press the button for the list that you want to print.

The selected list is printed.

Summary of Contents for E-studio2040c


























































































































































































































































































Search results

Summary of Contents for E-studio2040c

Reviews:

Related manuals for E-studio2040c

Brands by name

Popular brands

Toshiba E-studio2040c, Management Manual

Search results

Summary of Contents for E-studio2040c

Reviews:

Related manuals for E-studio2040c

Brands by name

Popular brands