e-STUDIO203S/203SD DISASSEMBLY AND ASSEMBLY 8 - 6
3) Remove five screws, remove the operation unit, and disconnect
the connector.
4) Remove the right cabinet.
5) Remove the left cabinet.
6) Remove the rear cover.
7) Remove the table glass.
8) Move the carriage to the position indicated on the figure.
9) Loosen the screw which is fixing the tension plate.
10) Move the tension plate in the arrow direction to release the ten-
sion, and remove the belt.
11) Remove the screw, and remove the rod stopper.
12) Remove the rod.
13) Lift the rear side of the carriage, remove the belt and the con-
nector, and remove the carriage.
Note: When replacing the carriage unit, be sure to execute TC41-
06.
If TC41-06 is not executed, the carriage unit may not read
the reference line on the white Mylar, preventing the
document from being fed.
2)
4)
5)
6)
7)
1)
1)
1)
3)
1)
1)
1)
2)
4)
3)
1)
2)
3)
1)
2)
4)
3)
