55
7
Using the SCANNER key to begin scanning
1
Press the SCANNER (
) key.
The unit enters scan mode.
2
Place the original you wish to scan on the original table.
For the procedure for placing the original, see "ORIGINAL PLACEMENT"
(p.16).
3
Press the up copy quantity key to display the
number of the application that you wish to
use for scanning.
The application numbers are initially as follows.
•
Scanning is not possible during a copy job.
•
If the unit is used to begin a scan job during a print job, the scan job will be
stored and scanning will begin when the print job is completed.
Application
number
Application launched
SC1
Desktop Document Manager (if installed)
SC2
E-mail (your standard e-mail program in the
Windows OS you are using)
SC3
Fax (if a fax program is installed)
SC4
OCR (if an OCR program is installed)
SC5
Microsoft Word (if installed)
SC6
Any application set in Button Manager
