For users in the USA
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
WARNING:
FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly
approved by the manufacturer could void the user’s authority to operate this equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
WARNING:
Changes or modification mode to this equipment, not expressly approved by Toshiba TEC or parties
authorized by Toshiba TEC could void the user's authority to operate the equipment.
Notice for Users in U.S A.
Installed I/F Board (For Printer Standard Model)
Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠
♠♠♠♠♠♠♠♠♠♠
♠
♠
♠♠♠♠♠♠♠♠♠♠♠
♠
♠
♠♠♠♠♠♠♠♠♠
♠
♠♠
♠♠♠♠♠♠♠♠♠♠♠♠
♠♠
♠♠
♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠
♠♠
♠♠♠♠♠♠♠♠♠♠♠
♠♠♠
♠♠♠♠♠♠♠♠♠♠
♠
♠
♠♠♠♠♠♠♠♠♠♠♠
♠
♠
♠♠♠♠♠♠♠♠♠
♠
♠♠
♠
Shielded cables must be used with this equipment to maintain compliance with
FCC regulations.
This product utilizes tin-lead solder, and a fluorescent lamp containing a small
amount of mercury.
Disposal of these materials may be regulated due to environmental
considerations.
For disposal or recycling information, please contact your local authorities or the
Electronics Industries Alliance: www.eia.org
AR-PG2
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
Model Number:
AR-PG2 (I/F Board)
Responsible Party: Toshiba America Business Solutions, Inc.
2 Musick, Irvine, California 92618, U.S.A.
Tel: 949-462-6000
