Toshiba E-Studio 557 Manual Download Page 45

Page: 45 / 116

1.TROUBLESHOOTING FOR THE HARDWARE

Replacing a Toner Cartridge 43

1 TROUBLESHOOTING FOR THE HARDWARE

Hold the green handle and pull the toner cartridge
holder toward you.

Take out the empty toner cartridge in the arrow
direction.

Never attempt to incinerate toner cartridges.

Dispose of used toner cartridges in accordance with local
regulations.

Shake the new toner cartridge well to loosen the toner
inside.

Pull out the seal in the direction of the arrow.

Align the toner cartridge with the orange portion of
the holder and insert it securely.



If it is hard to insert the toner cartridge, rotate it little by
little to insert it in the correct position.



If the toner scatters, wipe it off completely.

Summary of Contents for E-Studio 557




















































































































Search results

Summary of Contents for E-Studio 557

Reviews:

Related manuals for E-Studio 557

Brands by name

Popular brands

Toshiba E-Studio 557, Manual

Search results

Summary of Contents for E-Studio 557

Reviews:

Related manuals for E-Studio 557

Brands by name

Popular brands