Toshiba E-Studio 557 Manual Download Page 30

Page: 30 / 116

1 TROUBLESHOOTING FOR THE HARDWARE

28 Clearing a Paper Misfeed

Close the exit cover.

Open the exit cover.

Remove paper that sticks out from the paper exit
cover side and middle of the reverse unit.

When removing the paper from the paper exit cover side, be
sure to pull it in the direction of the arrow. Otherwise, it may
cause malfunction.

Do not touch the metal portion of the reverse unit (A in
the figure) or the guide plate (B in the figure).

It could burn or injure you.

Open the front cover of the equipment.

Turn the green dial of the fuser unit counterclockwise
to remove the misfed paper.

When the finisher is installed, connect it with the
equipment.

Connect the finisher with the equipment while pressing the lock
lever. Place your hand on portion A in the figure and then move
the finisher carefully.

Be careful not to let your fingers be caught between the
finisher and the equipment

Summary of Contents for E-Studio 557




















































































































Search results

Summary of Contents for E-Studio 557

Reviews:

Related manuals for E-Studio 557

Brands by name

Popular brands

Toshiba E-Studio 557, Manual

Search results

Summary of Contents for E-Studio 557

Reviews:

Related manuals for E-Studio 557

Brands by name

Popular brands