Toshiba E-Studio 557 Manual Download Page 110

Page: 110 / 116

8 WHEN SOMETHING IS WRONG WITH THE EQUIPMENT

108 When You Think Something Is Wrong With the Equipment

When You Think Something Is Wrong With the Equipment

If you think there is something wrong with the equipment, check the following items.



To see the functions of the equipment such as copy or print, refer to their operator’s manuals (the

Copying Guide

and the

Printing Guide

respectively).



Checking the operations or procedures may help you solve the problems. When you have what is not
clear in operating the equipment or you think something is wrong with it, the operator’s manual for the
function you are using will be helpful.



General operations

Problem Description

Cause

Corrective Action

The equipment does not
work at all.

The power cord is not
securely inserted into the
outlet.

Insert the power cord into the outlet until it
comes to a stop.

No icons or signs are
displayed on the touch
panel.
(The MAIN POWER lamp,
the ON/OFF lamp and the
[ENERGY SAVER] button
light.)

The equipment is in the Sleep
mode.

Press any of the [START], [COPY],
[e-FILING], [SCAN], [PRINT], [FAX] and
[ENERGY SAVER] buttons to clear the Sleep
mode.
Refer to the

Quick Start Guide

No icons or signs are
displayed on the touch
panel.
(Only the MAIN POWER
lamp lights.)

The power of the equipment is
not turned ON.

Press and hold the [POWER] button until the
ON/OFF lamp lights.

The equipment is in the Super
Sleep mode.

Press and hold the [POWER] button until the
ON/OFF lamp lights to clear the Super Sleep
mode.
Refer to the

Quick Start Guide

The touch panel is dim.

The contrast of the touch
panel is adjusted lower.

Adjust the contrast lighter.
Refer to the

MFP Management Guide

The button does not
respond to my operation.
(“Saving energy Press
START button” appears on
the touch panel.)

The equipment is in the
energy saving mode.

Press any of the [START], [COPY],
[e-FILING], [SCAN], [PRINT], [FAX] and
[ENERGY SAVER] buttons to clear the energy
saving mode.
Refer to the

Quick Start Guide

The button does not
respond to my operation.
(The MAIN POWER lamp,
the ON/OFF lamp and the
[ENERGY SAVER] button
light.)

The equipment is in the Sleep
mode.

Press any of the [START], [COPY],
[e-FILING], [SCAN], [PRINT], [FAX] and
[ENERGY SAVER] buttons to clear the Sleep
mode.
Refer to the

Quick Start Guide

The button does not
respond to my operation.
(Only the MAIN POWER
lamp lights.)

The power of the equipment is
not turned ON.

Press and hold the [POWER] button until the
ON/OFF lamp lights.

The equipment is in the Super
Sleep mode.

Press and hold the [POWER] button until the
ON/OFF lamp lights to clear the Super Sleep
mode.
Refer to the

Quick Start Guide

The window “Enter
Department Code”
appears.

The equipment is managed
under the department
management function.

Enter your department code. If you do not
know it, contact the administrator of the
equipment.

The window “Enter the
user name and Password”
appears.

The equipment is managed
under the user management
function.

Enter your user name and password. If you do
not know them, contact the administrator of
the equipment.

Summary of Contents for E-Studio 557




















































































































Search results

Summary of Contents for E-Studio 557

Reviews:

Related manuals for E-Studio 557

Brands by name

Popular brands

Toshiba E-Studio 557, Manual

Search results

Summary of Contents for E-Studio 557

Reviews:

Related manuals for E-Studio 557

Brands by name

Popular brands