Toshiba e-STUDIO 161 Operator'S Manual Download | Manualshive

Page: 9 / 76

background image

3

CAUTIONS

Follow the cautions below when using this machine.

CAUTIONS ON USING

Warning:

•

The fusing area is hot. Exercise care in this area when removing misfed paper.

•

Do not look directly at the light source. Doing so may damage your eyes.

Caution:

•

Do not switch the machine rapidly on and off. After turning the machine off, wait 10 to 15 seconds before turning it
back on.

•

Machine power must be turned off before installing any supplies.

•

Place the machine on a firm, level surface.

•

Do not install the machine in a humid or dusty location.

•

When the machine is not used for a long time, for example, during prolonged holidays, turn the power switch off
and remove the power cord from the outlet.

•

When moving the machine, be sure to turn the power switch off and remove the power cord from the outlet.

•

Do not cover the machine with a dust cover, cloth or plastic film while the power is on. Doing so may prevent heat
dissipation, damaging the machine.

•

Use of controls or adjustments or performance of procedures other than those specified herein may result in
hazardous laser radiation exposure.

•

The socket outlet should be installed near the equipment and be easily accessible.

•

ALWAYS keep the plug and outlet clean. Prevent them from accumulating dust and dirt. This could cause a fire
and give you an electric shock due to the heat released by electric leakage.

•

DO NOT place heavy objects on the original glass and do not press on it with force.
Breaking the glass could cause personal injury.

IMPORTANT POINTS WHEN SELECTING AN

INSTALLATION SITE

Improper installation may damage the machine. Please note the following during initial installation and whenever the
machine is moved.

Do not install your machine in areas that are:

If the machine is moved from a cool place to a warm place, condensation may form inside the machine.
Operation in this condition will cause poor copy quality and malfunctions. Leave the machine at room
temperature for at least 2 hours before use.

• damp, humid, or very

dusty

• exposed to direct sunlight

• poorly

ventilated

• subject to extreme

temperature or
humidity changes, e.g.,
near an air conditioner
or heater.

«
...
7
8
9
10
11
...
»

Summary of Contents for e-STUDIO 161













































































Reviews:

No comments

Related manuals for e-STUDIO 161

Pixma MG2400 Series

Brand: Canon Pages: 2

Brand: Panasonic Pages: 24

Brand: Oki Pages: 40

Workio DP-1820E

Brand: Panasonic Pages: 38

Brand: Samsung Pages: 82

Brand: Samsung Pages: 2

Brand: olympia electronics Pages: 4

WorkCentre Pro 40

Brand: Xerox Pages: 14

Brand: Magicard Pages: 2

Brand: Magicard Pages: 2

Brand: BIXOLON Pages: 29

Brand: Copystar Pages: 4

8437477 - EasyShare ESP 9 All-In-One Printer

Brand: Kodak Pages: 143

Brand: Xiamen Hanin Electronic Technology Pages: 62

Brand: Wang Pages: 181

Brand: Konica Minolta Pages: 15

Brand: Sagem Pages: 126

Brand: Lexmark Pages: 289

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands