Toshiba e-STUDIO 161 Operator'S Manual Download

Page: 61 / 76

Chapter 6

ROUTINE MAINTENANCE

This chapter explains how to keep the machine operating smoothly, including viewing copy count, the toner level
indicator, and cleaning the machine.

CHECKING THE TOTAL OUTPUT
COUNT AND TONER LEVEL

CHECKING THE TOTAL OUTPUT COUNT

From the "0" display, you can check the total output count, total copy count, as explained below.
The total output count is all pages (for both printing and copying) printed by the machine and the total output count
can be counted up to 999,999.

[Total output count]

Hold down the [0] key.

The total output count
appears sequentially in
two parts while you hold
down the [0] key.

Example:

Total number of pages output is 12,345.

[Total copy count]

Hold down the [

] key.

The count display and
counting method are the
same as for the total
output count.

• Each A3 (LD) size page is counted as two

pages.

• During a copy run, pressing the [0] key

shows the number of completed copy
pages, not the total output count.

Note

The total number of pages printed in printer
mode can be calculated by subtracting the
total copy count from the total output count.

Note

Summary of Contents for e-STUDIO 161













































































Search results

Summary of Contents for e-STUDIO 161

Reviews:

Related manuals for e-STUDIO 161

Brands by name

Popular brands

Toshiba e-STUDIO 161, Operator'S Manual

Search results

Summary of Contents for e-STUDIO 161

Reviews:

Related manuals for e-STUDIO 161

Brands by name

Popular brands