Toshiba e-studio 1101 Operator'S Manual Download Page 196

Page: 196 / 230

Document Server

176

Changing User Name, File Name or Password of a Stored
Document

Following describes the procedure for changing a user name, document name or
password.

Press the

{

Document Server

}

key.

Select the document whose user name, document name or password is to
be changed.

When a password is set, enter it and then press

[

]

Press

[

Edit File

]

Press

[

Change User Name

]

[

Change File Name

]

[

Change Password

]

From the respective change screens, enter the new user name, document
name or password and then press

[

]

Press

[

]

Note

❒

Depending on the security settings,

[

Change Access Priv.

]

is displayed in-

stead of

[

Change User Name

]

❒

For details about procedure for setting

[

Change Access Priv.

]

, ask the admin-

istrator.

Summary of Contents for e-studio 1101







































































































































































































































Search results

Summary of Contents for e-studio 1101

Reviews:

Toshiba e-studio 1101, Operator'S Manual, Page: 196 / 230

Search results

Summary of Contents for e-studio 1101

Reviews: