Toshiba e-studio 1101 Operator'S Manual Download Page 143

Page: 143 / 230

Copier Functions

123

Press

[

Change Text

]

Enter stamp text, and then press

[

]

Press

[

All Pages

]

[

1st Page Only

]

to select the print page.

Place originals, and then press the

{

Start

}

key.

Note

❒

If the Main Power is turned off, the text is cleared. To save the typed text,
you can program them.

Reference

“Stamp”, General Settings Guide

Changing the stamp position

Press

[

Change

]

under Stamp Position.

Select the desired position, and then press

[

]

Image Repeat

The original image is copied repeatedly.

The number of repeated images depends on the original size, copy paper size,
and reproduction ratio. For example, see the following table.

Summary of Contents for e-studio 1101







































































































































































































































Search results

Summary of Contents for e-studio 1101

Reviews:

Toshiba e-studio 1101, Operator'S Manual, Page: 143 / 230

Search results

Summary of Contents for e-studio 1101

Reviews: