Toshiba e-studio 1101, Operator'S Manual, Page: 118 / 230

Copying
98
2
D
Press the key for the border you want to change and set an erase width with
[
n
]
and
[
o
]
.
Pressing [ n ] or [ o ] changes the width in increments of 1 mm (0.04"). Press-
ing and holding down the relevant key changes the width in increments of 10
mm (0.4").
If you select to erase the image on the back of the original, press
[ 2 Sided Set-
ting ] and [ Back ] .
Erasing the image on the back is valid when you copy 2-Sided originals.
E
Press [ OK ] .
F
Place the originals, and then press the
{
Start
}
key.
Center/Border Erase (same width)
This mode erases both the center and edge margins of the original image.
A
Press [ Edit ] .
B
Press [ Erase Cntr/Brdr ] .
C
Press [ Same Width ] .