Toshiba e-studio 1101 Operator'S Manual Download Page 41

Page: 41 / 230

Placing Originals

SADF mode

In SADF mode, even when an original is placed page by page in the ADF, each
page is automatically fed when placed.

Important

❒

You should make a setting so that

[

SADF

]

is displayed. See “Copier/Docu-

ment Server Features”, General Settings Guide.

Press

[

SADF

]

Place one page of an original, and then press the

{

Start

}

key.

When the machine instructs you to place another original, place the next
page.

The second and subsequent pages will be fed automatically without pressing
the

{

Start

}

key.

Note

❒

[

SADF

]

is not displayed on the screen, set

[

SADF

]

with

[

Special Original Display

Defaults

]

. See “Copier/Document Server Features”, General Settings Guide.

When the Sort, Combine or 1 Sided

→

2 Sided mode has been set, press the

{

}

key after all originals have been scanned.

Reference

“Copier/Document Server Features”, General Settings Guide
“Input/Output”, General Settings Guide

APF027S

Summary of Contents for e-studio 1101







































































































































































































































Search results

Summary of Contents for e-studio 1101

Reviews:

Toshiba e-studio 1101, Operator'S Manual, Page: 41 / 230

Search results

Summary of Contents for e-studio 1101

Reviews: