Toshiba e-studio 1101 Operator'S Manual Download Page 139

Page: 139 / 230

Copier Functions

119

Specifying the first printing page and start number (“P1,P2...”, “-1-,-2-...”, “P.1,P.2...”,
“1,2...”)

Below explains the example when “P1,P2...” is selected. The steps are the same
for other cases.

Press

[

Change

]

under Change Numbering.

Press

[

First Printing Page

]

, enter the original sheet number from which to start

printing from, and then press the

{

}

key.

Press

[

First Printing Number

]

, enter the number of page from which to start

numbering from with the number keys, and then press the

{

}

key.

The example below shows when the first printing page is “2” and the start
number is “3”.

Press

[

Last Number

]

, enter the number of the page at which to stop number-

ing with the number keys, and then press the

{

}

key.

If you want to number all pages to the end, press

[

to the End

]

When page designation is complete, press

[

]

GCANPE2J

Summary of Contents for e-studio 1101







































































































































































































































Search results

Summary of Contents for e-studio 1101

Reviews:

Toshiba e-studio 1101, Operator'S Manual, Page: 139 / 230

Search results

Summary of Contents for e-studio 1101

Reviews: