Toshiba e-studio 1101, Operator'S Manual, Page: 113 / 230

Copier Functions
93
2
Note
❒
You can move the scanning position upward, downward, to left and to right
up to 30 mm (1.2") in 1 mm (0.04") steps.
A Top: 0 – 30 mm, 0" – 1.2"
B
Right: 0 – 30 mm, 0" – 1.2"
C
Bottom: 0 – 30 mm, 0" – 1.2"
D Left: 0 – 30 mm, 0" – 1.2"
A
Press [ Edit ] .
B
Press [ Scan Position ] .
C
Set the scanning position for the front of the original. Press [
↑
] or [
↓
] to set
the top or bottom position. Press [
←
] or [
→
] to set the left or right position.
D
Set the scanning position for the back of the original. Press [
↑
] or [
↓
] to set
the top or bottom position. Press [
←
] or [
→
] to set the left or right position.
Then press
[ OK ]
.
E
Place the originals, and then press the
{
Start
}
key.
Note
❒
If you have incorrectly set the position, readjust with [
↑
] , [
↓
] , [
←
] or [
→
] .
❒
If you don't need to set the scanned position of the back of the original in
step
D
, press [ OK ] and go to step
E
.
❒
The scanning position for the back is valid only when you are copying 2-
sided originals.