Toshiba DST-3100, Owner'S Manual

Page: 11 / 96

11
Introduction
Open the cover.
Insert the four AAA batteries.
Make sure to match the + and – on the batteries to
the marks inside the battery compartment.
Close the cover.
Notes on batteries:
Improper use of batteries may cause battery leakage and
corrosion. To operate the remote control correctly, follow the
instructions below.
• Do not insert batteries into the remote control in the wrong
direction.
• Do not charge, heat, open, or short-circuit the batteries. Do
not throw batteries into a fire.
• Do not leave dead or exhausted batteries in the remote
control.
• Do not use different types of batteries together, or mix old
and new batteries.
• If you do not use the remote control for a long period of time,
remove the batteries to avoid possible damage from battery
corrosion.
• If the remote control does not function correctly or if the
operating range becomes reduced, replace all batteries with
new ones.
• If battery leakage occurs, wipe the battery liquid from the
battery compartment, then insert new batteries.
1
2
3
Loading Batteries
Programming Your Remote Control
1
2
Slide the remote control’s SAT/TV1/TV2
switch to either TV1 or TV2.
While holding down MUTE, use the
numbered buttons to enter the appropriate
3-digit code for your brand of TV. (See the
next page for applicable codes.)