4.6 DeviceNet network setting
Unified Controller nv Series DeviceNet Module DN611B Instruction Manual
71
For details on how to use the DeviceNet setting tool, refer to the ACM manual.
This chapter describes about simple operation method for registering DeviceNet slave I / O devices using ACM.
If the screen or setting method changes due to ACM version upgrade, etc., refer to the ACM instruction manual.
This chapter uses the following diagram as an example of the configuration.
Figure 4-10 Example of system configuration using DN611B and its settings
Allen-Bradley Flex I/O Node Address = 3
1794-ADN
1794-IB16
1794-OB16
[1]
[2]
[3]
Input Address
Input Address
Output Address
= 0 to 1
= 2 to 5
= 0 to 3
DN611B
IB16 Input
OB16 Output
■DeviceNet Node Address=1
DeviceNet
PUM12
DN611B Memory Map
Input Data Area
Output Data Area
Summary of Contents for DeviceNet nv Series
Page 30: ...Chapter 1 DN611B Introduction 6F8C1686 14 ...
Page 149: ...13 3 133 B Appendix B Outside Dimension ...
Page 159: ...1686 2 2201 ...