Toshiba DeviceNet nv Series, Instruction Manual, Page: 129 / 159

6.1 RAS
Unified Controller nv Series DeviceNet Module DN611B Instruction Manual
113
Table 6-18 Event Trace Items(1/2)
Event
Code Detail
Information 1 (H) Detail
Information 2 (H) Detail
Information 3 (H) Detail
Information 4 (H) Description
0001H Down code 1: Memory check
2: TRAP
3: WDT
Module down
0002H 01:Power ON Station Status Type of DN
02:Soft Reset Station Status module start.
03:Controller HALT
0003H Before mode change After mode change Station change
0100H Request ID Request code Completion status Control port
0111H Station status Reset request
0112H Type
00: Local station
setting
01: Port No. error
02: Node address
different
03: Polling mode
04: Scan time
05: Skip
06: Transmission
counter
Parameter
request
01: Slave setting 01: Number error
02: Port No. error
03: Node address
error
04: Same as local
station node address
specified
05: Data length error
0113H Type
01: Unused BITON
Request mode Present station
status
Control request
02: Identical request
03: Permission bit ON
(invalid in STBY
mode)
04: STBY + RUN
05: RUN in run mode
06: Task start error
07: STBY in STBY
mode
08: Composition data
end
Parameter setting flag Completion status
0118H Request code (18H) Completion status Time setting
0407H Error code Duplicate node
address error