English
- 63
R
ecording
Editing the Scheduled
Record List
Follow these directions to edit the timer record list.
1
With the unit in Stop mode, press the
MENU
button.
2
Press the
…†
button to select
Programme
, then
press the
OK
or
√
button.
3
Press the
OK
or
√
button.
RETURN
OK
MOVE
EXIT
Scheduled Record List
DVD-RAM(VR)
01 DVD AV1
SAT01 11:00 13:00
SP
--
√
√
02 DVD AV1
SAT01
09:22 10:30
SP
--
√
√
03 --
--- --/--
--:--
--:--
-- --
√
√
04 --
--- --/--
--:--
--:--
-- --
√
√
05 --
--- --/--
--:--
--:--
-- --
√
√
06 --
--- --/--
--:--
--:--
-- --
√
√
No. To PR Day Start End Speed V/P Edit
RETURN
OK
MOVE
EXIT
Programme
DVD-RAM(VR)
Standard Timer
√
√
Disc Navigation
Playlist
Disc Manager
Copy
Programme
Setup
Timer recording will not work when the power is
on. When the power is switched on, programmes
registered for recording in Timer recording will
be automatically cleared after the start time and
date have passed.
The timer recording time may differ from the set
time depending on disc status and overall timer
recording status (for example, recording times
overlapping, or when the previous recording
ends within 3 minutes before the start time of
the next recording.)
Note
●
Recording Speed (DVD)
AUTO
: Select when you want to set video quality
automatically. In AUTO Mode, the most suitable
record mode is adjusted automatically, according to
remaining time on the disc and length of the timer
recording. This function is selected only one mode
in XP, SP, LP and EP modes and you can use this
mode for timer recording.
XP
(high quality) : Select when audio and video
qualities are important. (Approx. 1 hour)
SP
(standard quality) : Select to record in standard
quality. (Approx. 2 hours)
LP
(low quality) : Select when a long recording time
is required. (Approx. 4 hours)
EP
(extended mode) : Select when a longer record-
ing time is required. (Approx.6 hours at 1.2Mbps or
Approx. 8 hours at 0.8 Mbps.)
●
Recording Speed (VCR)
AUTO
: Select when you want to set video quality
automatically. It depends on remaining time
of VCR tape.
SP
: Standard Play, for best picture quality.
LP
: Long Play, for maximum recording time
(3 times SP).
●
V/P(VPS/PDC)
VPS
: Video Programme System
PDC
: Programme Delivery Control
• Do not select V/P unless you are sure the programme
you wish to record is broadcast with VPS/PDC.
If you do set V/P to On, then you must set up the start-
time EXACTLY according to the published TV schedule.
Otherwise the timer recording will not operate.
7
Press the
OK
button.
If the timer settings overlap
The programmes are recorded in order of priority.
If timer recording is set for the first programme and
then again for the second programme and both
programmes overlap, the following message will
appear on the screen: “This setting is identical with
1” The message shows that the first programme
has priority. After recording of the first programme
is complete, the second programme starts being
recorded.
To exit without saving the current setting
Press the
MENU
or
RETURN
button.
To return to the previous menu
Press the
RETURN
button if you don’t want to set
a timer recording.
8
Turn the power off to finish the timer recording.
•
will blink if disc or tape is not inserted.
• will appear on the front panel. It means that a
timer recording is registered.
When you are recording at EP mode on a
DVD-RW(V mode)/-R disc, it may not record the
full 6 or 8 hours because the unit uses the
VBR(Variable Bit Rate) ENCODING system.
For example, if you record a programme with a
lot of action, it uses a higher bit rate which in
turn consumes more disc memory.
Note
VR25SB-2-eng 5/6/05 5:43 PM Page 63
