1
FCC Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modification not expressly approved by manufacturer for compliance could voi
d the user’s authority
to operate the equipment.
Some types of this product are equipped with a wireless communication device, such as, BT800 and RS9113.
Please be sure to read the enclosed Precautions for Handling of Wireless Communication Devices before
using this product.
“This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.”
(for CANADA only)
Note:
When you purchase interface cables on the market, shielded cables must be chosen and used.
This product is designed for commercial usage and is not consumer product.
California Proposition 65: USA-California only
WARNING:
This product can expose you to chemicals including DINP which is known to the State of California to cause cancer.
For more information go to
www.P65Warnings.ca.gov.
CE Compliance (for EU only)
Hereby, Toshiba TEC Germany Imaging Systems GmbH declares that the radio equipment type B-FP3D is
in compliance with the Radio Equipment Directive 2014/53/EU and the RoHS Directives 2011/65/EU & (EU)
2015/863. The full text of the EU declaration of conformity is available at the following internet address:
https://www.toshibatec.eu/support/environment/
The following information is for EU-member states only:
Disposal of batteries and/or accumulators
(based on EU-Directive 2006/66/EC,
Directive on batteries and accumulators and waste batteries and accumulators)
The use of the symbol indicates that batteries and/or accumulators may not be disposed as
unsorted municipal waste and has to be collected separately.
By ensuring that batteries and/or accumulators are disposed of correctly, you will help prevent
potential negative consequences for the environmental and human health, which could
otherwise be caused by inappropriate waste handling of this product.
For more detailed information about the take-back and recycling of batteries and/or
accumulators, please contact your supplier where you purchased this product.
