17
Daily maintenance
To help retain the high quality and performance of your printer, it should be cleaned regularly cleaned.
Print head
Wipe the print head element with a print head
cleaner pen.
When linerless labels are used, wipe off dirt of
residual glues from the Print head after the use of
one or two media rolls.
NOTE:
Use caution when working with the Tear bar. The
edge is sharp
Platen
and strip shaft
Wipe clean the platen with a soft cloth slightly
moistened with absolute ethyl alcohol, while rotating
the platen.
Wipe clean the strip shaft with a soft cloth slightly
moistened with absolute ethyl alcohol
Clean the platen of the linerless label kit in the same
way. Cleaning should be performed after the use of
one or two media rolls.
CAUTION!
DO NOT USE a sharp object to clean the print head or various rollers, as this may cause a print failure or
breakdown of the printer.
NEVER USE any volatile solvent including thinner and benzene, as this may cause a print failure or breakdown of
the printer.
Do not touch the print head element with bare hands, as a static discharge may damage the print head.
The print head becomes hot immediately after printing. Allow it to cool before performing any maintenance.
Platen
Print Head Element
Print Head Cleaner Pen
Strip shaft
