13
Loading the Media
1.
Push the Top Cover Open Button to open the Top
Cover.
2.
Move the Paper Guide Lever toward the
Operation Panel and the Paper Guides outward.
NOTE:
Do not move the Paper Guides without unlocking
the Paper Guide Lever. Doing this may break the
Paper Guide.
3.
Place a media roll in the printer. Only outside
wound media can be used in the printer.
NOTE:
Use caution when working with the Tear bar. The
edge is sharp.
4.
Adjust the Paper Guides to the media roll width.
5.
Push back the Paper Guide Lever to lock the
Paper Guides.
6.
Pull the top edge of the media toward the
Operation Panel, and close the Top Cover
removing slack of the media.
NOTE:
Please use TOSHIBA TEC approved media only.
Toshiba TEC is not responsible for any print
result caused by use of other media
When you order media, please contact the
nearest TOSHIBA TEC representative.
Top Cover
Open Button
Top Cover
Paper Guide
Lever
Paper
Guide
Release
Media
Top Cover
Paper Guide
Lever
Paper Guide
Lock
CAUTION!
The Print Head becomes hot immediately after
printing, allow it to cool before loading the media.
