11
Loading a battery pack
Press the Battery Lever to open the Battery Cover,
insert the Battery Pack fully into the printer. The
Battery Pack is locked in by the Battery Cover.
Be careful of the orientation of the Battery Pack.
NOTE:
Be sure to use only the battery pack designed and
manufactured for use with the printer B-FP3D
series Battery Pack:
B-FP803-BTH-QM-R
When unpacked, the battery level of the supplied
Battery Pack is not full. Please charge the Battery
Pack with an optional Battery Charger or load the
Battery Pack in the printer and connect an
optional adapter before using it.
Single-slot Battery charger:
B-EP800-CHG-QM-R
6-slot Battery Charger:
B-EP800-CHG6-QM-R
AC Adapter:
B-EP800-AC-QM-R
Cigarette lighter adapter:
B-EP802-DC12-QM-R
DC Jack plug adapter:
B-FP800-DCJA-QM-R
[B-FP3D Series]
1. If the battery pack leaks liquid or gives out smoke or bad smell, immediately stop using it and keep it
away from fire. Failure to do this may cause an explosion or a fire.
2. In the United States, used lithium ion batteries should be returned to the store where you bought the
machine. (USA only)
3. LITHIUM ION BATTERY DISPOSE OF PROPERLY
Caution: Do not handle damaged or leaking lithium ion battery.
4.
To avoid injury, be careful not to drop the battery pack on your foot.
WARNING!
CAUTION!
DO NOT CONNECT any device other than the
above to the printer.
Battery Pack
Battery Lever
Tab
