2. PRINTER SETUP
ENGLISH VERSION EO1-33094
2.6 Printer Setting
E2-39
2.6.12 Copying Data to/from
USB Memory
The USB Memory menu allows the copying of data from a USB
memory to the printer and saving data from the printer to a USB
memory.
USB memory can be used only when an optional RTC & USB Host
Interface Card, B-EX700-RTC-QM-R, is installed.
(1) USB TO PRINTER
This parameter is to copy data from a USB memory to the
printer.
•
COPIED DATA File (*.DAT) containing firmware
(BOOT/MAIN/ CG/KANJI/HTML), storage
area information, and parameter settings
•
CONFIG FILE
File (*.CFG) in which the path of the firmware
(BOOT/MAIN/ CG/KANJI/HTML) is saved
1. When the file selection screen is displayed choose a file to be
copied.
(Example)
2. When the [ENTER] key is pressed, the confirmation message is
displayed.
For the CFG files, the message included in the CFG file is
displayed prior to the confirmation message.)
3. The data is read from the USB memory. It takes 3 to 5 minutes
to read all the information.
(2) PRINTER TO USB
This parameter is to save the firmware (BOOT/MAIN/CG/
KANJI/HTML), storage area information, and parameter
settings to a USB memory.
•
ALL
1. The confirmation message is displayed.
2. The data is copied to the USB memory. It takes approx. 40
seconds to save all information.
A file is automatically created in the USB memory and named in
the following format based on the printer model and saved date.
/ATA0/SYSTEM/B-EX4T1-T1105.DAT
(e.g. B-EX4T Type1, 305 dpi model, November 5)
SYSTEM MODE
<10>RFID
<11>RTC
<12>Z-MODE
<13>USB MEMORY
NOTE:
If a file with the same name
already exists in the USB
memory, it will be overwritten.
NOTE:
Usable USB memory’s file
system is as follows:
File system
Max. size
FAT (FAT16)
2GB
FAT32 8GB
To use USB memories of the
other file system, they need to
be formatted to either of the
above on the PC in advance.
