Toshiba B-EX4T2 SERIES Owner'S Manual Download

Page: 43 / 136

2. PRINTER SETUP

ENGLISH VERSION EO1-33094

2.6 Printer Setting

E2-29

2.6.8 Logging

The Log menu allows the saving of print logs to USB memory.

(1) LOG

•

PRINTER TO USB Saves print logs in the USB memory.

A file is automatically created in the USB memory and named in

the following format based on the printer model and saved date.

/ATA0/LOG/B-EX4T1_LOG_1007291030.TXT
(e.g. B-EX4T Type1, 10:30, July 29, 2010)

USER SYSTEM MODE

<6>Z-MODE
<7>AUTO CALIB
<8>DUMP MODE

<9>LOG

NOTES:

1. If a file with the same

name already exists in the
USB memory, it will be
overwritten.

2. If an error occurs while

using the USB memory,
the error message is
displayed. For details, refer
to Section 2.6.12 Copying
Data to/from USB Memory.

After clearing the error the
printer does not resume
logging automatically.

Summary of Contents for B-EX4T2 SERIES









































































































































Search results

Summary of Contents for B-EX4T2 SERIES

Reviews:

Related manuals for B-EX4T2 SERIES

Brands by name

Popular brands

Toshiba B-EX4T2 SERIES, Owner'S Manual

Search results

Summary of Contents for B-EX4T2 SERIES

Reviews:

Related manuals for B-EX4T2 SERIES

Brands by name

Popular brands