7. SUPPLY SPECIFICATIONS
ENGLISH VERSION EO1-33094
7.1 Media
E7-
２
7.
Max.
effective
print width
Max.
104.0 +-0.2
104.0 +-0.2
104.0 +-0.2
Min. 6.0 15.0 17.0 6.0 15.0 17.0 3.0 8.0 17.0
Label
Max. 1496.0 1496.0 1492.0 1496.0 1496.0 1492.0 496.0 496.0 492.0
Min. 8.0
－
19.0 8.0
－
21.4 5.0
－
19.0
8.
Effective
print length
Tag
Max. 1498.0
－
1498.0
1498.0
－
1498.0
498.0
－
498.0
Slow-up
1.0 1.0 1.0
9.
Slow-up and
down area
(Un-print
area)
Slow-down
1.0 1.0 1.0
Min.
0.13 0.13 0.13
10.
Paper
thickness
Max.
0.17 0.17 0.17
Min.
- 0.08 - 0.08 - 0.08
11.
Paper
thickness
can be cut
Max.
- 0.17 - 0.17 - 0.17
12.
Max. paper roll diameter
φ
200
(Using external rewinder
φ
180)
φ
200
(Using external rewinder
φ
180)
φ
200
(Using external rewinder
φ
180)
13. Paper
winding
direction
Inside the printing side
(STD.)
Inside the printing side
(STD.)
Inside the printing side
(STD.)
14. Paper
core
Inside diameter
φ
76.2±0.3
Inside diameter
φ
76.2±0.3
Inside diameter
φ
76.2±0.3
NOTES:
1. To ensure print quality and print head life use only TOSHIBA TEC specified media.
2. When using the peel-off at 12”/sec or more for 203dpi model, issue at 10”/sec.
When using the peel-off at 10”/sec or more for 300dpi model, issue at 8”/sec.
3. When using the disk cutter, the label length must meet the following condition:
Label length 18.0mm - (Gap length/2).
4. The Strip Module do not support the print speed of 10”/sec. or faster.
5. The ratio of a label length to a gap length must be a minimum of 3 to 1 (3:1).
6. When using label stock in cut mode, be sure to cut in the gaps. Cutting labels will cause the adhesive
to stick to the cutter, which may affect the cutter performance and shorten the cutter life.
7. When the Strip Module is used on the GS12 (203 dpi) model, the print speed is automatically corrected
to 10”/sec. if 12”/sec. or faster is specified.
When the Strip Module is used on the TS12 (300 dpi) model, the print speed is automatically corrected
to 8”/sec. if 8”/sec. or faster is specified.
