Toshiba AW-9500SBJ/SBK/SBX, Service Manual

Page: 35 / 52

– 34 –
* Follow the reverse order of removal.
Note 1 : Care must be given during assembling
as the suspensor rod on the motor side
differs from the one on the side opposite
the motor. (Fig. 12)
Suspensor Rod Spring Color
Motor side Yellow
Opposite side of
White
the motor
Note 2 : Looking from the front side of the
machine, wind the air tube to the left two
turns around the suspensor rod at the
rear left. (counterclockwise) As forgetting
to do this may results in noise from the
air tube striking other components or in
breakage, be sure that the air tube is
wound around the suspensor rod.
(15) Spring
assembly
1) Keep standing the top cover according to
the steps 1) to 5) of (3) Lid switch.
2) Remove the holder 2 from the cabinet
reinforcement plate. While holding the tub
with one hand, remove suspensor rod from
the tub suspension.
(Fig. 11)
(Lifting the tub with one hand will make it
easy to float the suspensor rod.)
Yellow
Holder 2
Cabinet
reinforcement
plate
(Fig. 11)
white
Suspensor
rod
Cabinet
Cabinet
(Fig. 12)
Front
Parts
Procedure ( : Notes)
Illustrations