Toshiba 8200 - Tecra - PIII 750 MHz, User Manual

Page: 68 / 300

68
Connecting Other External Devices
Adding memory
Adding memory
HINT: To purchase additional memory modules, see the
accessories information packaged with your system or visit
www.toshibaaccessories.com
.
Your Tecra 8200 Series computer is equipped with a 100 MHz
Front Side Bus (FSB) SDRAM memory module. The two
memory slots in this computer provide various memory
configurations. When additional memory is added, or original
memory replaced, it is recommended that you use only compatible
100 MHz memory. In the event original memory is replaced with
invalid memory, such as 66 MHz, the system will beep and will
not boot beyond the BIOS memory check. A message may
display. If this occurs, contact Toshiba’s support center at
(800) 457-7777.
Since your computer was built to order, it should have enough
memory to run your current applications. However, if your
requirements change, you can install extra memory up to a
maximum of 512 MB.
Memory module sizes
Additional memory is easy to install. Memory modules come in
the following sizes:
❖
64 MB PC100 SDRAM
❖
128 MB PC100 SDRAM
❖
256 MB PC100 SDRAM