Toshiba 8200 - Tecra - PIII 750 MHz, User Manual

Page: 100 / 300

100
Learning the Basics
Using a compact disc drive
8 Make sure the disc is completely on the spindle and is lying
flat on the tray.
CAUTION: If you insert the disc incorrectly, it may jam the
drive. If this happens, contact your network administrator for
assistance.
9 Push the disc tray in by pressing gently on the center of the
tray until it clicks into place.
You are ready to use the disc.
Playing a CD or DVD
For information on playing a disc, see “Playing an audio CD-
ROM” on page 140 , or “WinDVD” on page 153 .
Removing compact discs
To remove a compact disc (CD or DVD) with the computer turned
on:
1 Press the eject button on the drive.
CAUTION: Do not press the eject button while the in-use
indicator light is glowing. Doing so could damage the disc
or the drive.
Also, if the disc is still spinning when you open the disc tray,
wait for it to stop spinning before you remove it.
2 Pull the tray until it is fully open, remove the disc, and place it
in its protective cover.
3 Gently push the tray in to close it.
To remove a compact disc with the computer turned off: