Toshiba 8200 - Tecra - PIII 750 MHz, User Manual

Page: 200 / 300

200
Keeping Your Files Safe
User-level passwords
4 You must restart your computer in order for changes to take
effect.
Your user password is now in effect. Use it when you start the
computer (power-on password), or when you use the hot key
Fn
+
F1
(instant password).
Setting a user-level password in TSETUP
HINT: If you forget your password and have lost your
password service diskette, contact the Toshiba InTouch
Center (US telephone number (800) 457-7777).
To register a user-level password in TSETUP and create a
password service diskette:
1 Click Start, then Shut Down. Select Shut down and click
OK.
The computer shuts down and turns itself off.
2 Connect your diskette drive. For instructions, see “Connecting
an external diskette drive” on page 64 or “Inserting a module
into the SelectBay” on page 76 , depending upon the type of
diskette drive you have.
3 Insert a write-enabled diskette into the diskette drive.
HINT: Run TSETUP outside Windows, at a system prompt. If
you try to run TSETUP from an MS-DOS session under
Windows, results can be unpredictable.
4 Slide the power button cover on the left side of the computer
toward the rear, revealing the power button.
5 Hold down the
Esc
key and press and hold the power button in
until the on/off light on the system indicator panel turns on
On