Toshiba 8200 - Tecra - PIII 750 MHz, User Manual

Page: 204 / 300

204
Keeping Your Files Safe
User-level passwords
Disabling a user-level password in TSETUP
To register a user-level password in TSETUP and create a
password service diskette:
1 Click Start, then Shut Down. Select Shut down and click
OK.
The computer shuts down and turns itself off.
HINT: Run TSETUP outside Windows, at a system prompt. If
you try to run TSETUP from an MS-DOS session under
Windows, results can be unpredictable.
2 Slide the power button cover on the left side of the computer
toward the rear, revealing the power button.
3 Hold down the
Esc
key and press and hold the power button in
until the on/off light on the system indicator panel turns on
(green)—about one second. When you receive the following
message: “Check system. Then press [F1] key,” press
F1.
TSETUP displays a setup screen.
4 Press
P
to move to the PASSWORD section of the screen.
5 Press the spacebar.
TSETUP asks you to enter a new password.
6 Press
Enter
.
7 When TSETUP prompts you to do so, verify the password by
pressing
Enter
.
8 Press
End
to save your change.
TSETUP asks you to confirm your choice.
9 Press
Y
to confirm you want to quit.
On