Toshiba 4560 Operator'S Manual Download Page 64

Page: 64 / 180

Place the last page of the originals (first
side).

●

Copying with the last page first will make
the copies arranged in the correct page
order.

Press the PRINT

key.

●

If the originals are odd-numbered, the
first copy will exit with one side blank.

55555

●

When the first-side original was placed
horizontally, the second-side original
should be placed horizontally but in the
opposite direction.

Place the next original (second side).

●

When the first-side original was placed
vertically, the second-side original should
be placed in the same direction.

Press the PRINT

key.

●

Duplexed copies will exit.

Repeat steps 5~8 until all the originals
are copied.

88888

77777

66666

99999

5. DUPLEXED COPIES FROM SINGLE-SIDED ORIGINALS (Cont.)

Automatic
document
feeder

Original

Original
scale

Summary of Contents for 4560





















































































































































































Search results

Summary of Contents for 4560

Reviews:

Related manuals for 4560

Brands by name

Popular brands

Toshiba 4560, Operator'S Manual

Search results

Summary of Contents for 4560

Reviews:

Related manuals for 4560

Brands by name

Popular brands